Mixers

Flex-Mix TPM

Flex-Mix TPM products are high-performance products that provide a simple powder mixture using the venturi principle.

Key features

High performance with a simple powder mixture using the venturi principle
Up to 50,000 lt/s capacity in "continue" applications
CIP-compatible "sanitary design"
Available in 2 models: TPM+1 (with direct motor connection) and TPM+2 (with belt motor connection)
Easy installation and start-up
Ability to dissolve up to 60 kg/min for TPM+1 and up to 150 kg/min for TPM+2
All surfaces in contact with food are of AISI316L stainless steel quality
Gasket usage according to the product: EPDM, or FPM (viton)
Funnel usage according to measurement: 30 lt, 45 lt, and 100 lt
All surfaces in contact with the product are 2B (Ra<1 μm)
Powder addition can be done manually or with automatic dosing
If desired, a level sensor and vibration motor can be provided in the powder hopper

Options: Air operated throttle valve. · Double shaft seal with water flushing. · Seal material in FPM (Viton). · Motor in NEMA norm. · Level sensor and/or vibrator on powder hopper if required.

Specification	Unit	TPM +1	TPM +2
MOTOR	kW	4–5.5–7.5	11–15
RPM @ 50HZ	2900	2200
MAXIMUM LIQUID CAPACITY	L/H	25,000	50,000
POWDER CAPACITY (*)	KG/MIN.	60	150
MAXIMUM TEMPERATURE	C	140	140
MINIMUM INLET PRESSURE(FEED PRESSURE)	BAR	0.5	0.5
MINIMUM OUTLET PRESSURE(COUNTER PRESSURE)	BAR	1.5	1.5
MINIMUM SYSTEM PRESSURE	BAR	10	10
SERVICE WATER FOR SHAFT SEAL - CAPACITY	L/H	15–30	15–30
SERVICE WATER FOR SHAFT SEAL - MAXIMUM PRESSURE	BAR	7	7
WEIGHT	KG	75 (4 kw)	160 (11 kw)
KG	90 (5.5 kw)	175 (15 kw)
KG	100 (7.5 kw)	-